60liters 80liters 100liters 120liters 160liters plastic jerry cans drums water tank blow molding machine TDB-160F
Extrusion System
The extrusion system includes gear box, extrusioin motor, inverter, screw, barrel, head and die. The extruder adopts gradient mixing type with high-speed energy saving design. Material of screw: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2. Material of barrel: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥900,brittleness≤2. The head runner has good design and head matel is processed for higher hardness. The die and core will be made according to your product design and size.
Extrusion blow molding machine technical feature:
The electronic control system: Japan's Mitsubishi PLC computer and human-machine interface (English or Chinese) control, color touch-screen operation. All the process set to change, retrieval, monitoring, troubleshooting and other functions are implemented on the touch screen, no point of contact with the working principle, components and durable.
The hydraulic system: proportional pressure control, with imported brands Yuken hydraulic components, stable and reliable.
The plasticizing system: efficient plastics mixing screw, to ensure plasticizing full uniform.
The speed control system: VVVF + alloy steel and hard gear reducer, speed stable, low noise, durable.
The opening and closing mold, mold transfer system: beam arm, three position, center locking clamping mechanism, to ensure long-term use. Clamping force balance, no deformation, the use of body translation mode (ball linear guide), high precision, low resistance, fast.
Blowing the needle holder: blow the whole Square-type needle holder, a solid does not shift to ensure a smooth incision products.
Extrusion blow molding machine technical specification:
| Model |
|
TDB-160F |
| Station |
|
Single station |
| Max. Product Volume |
(L) |
160L |
| Dry cycle |
(pc/h) |
300 |
| Screw Diameter |
(mm) |
100 |
| Screw L/D ratio |
(L/D) |
28 |
| Screw drive power |
(KW) |
75 |
| Screw heating capacity |
(KW) |
12.1~14 |
| No. of heating zone |
(ZONE) |
5 |
| Max.Output of HDPE |
(Kg/hr) |
200~250 |
| Oil pump drive power |
(KW) |
37 |
| Clamping force |
(KN) |
740 |
| Mold stroke (Platen distance) |
(mm) |
500~1400 |
| Max. Size of Mold(W*H) |
(mm) |
900*1450 |
| Capacity of the diehead |
(L) |
18 |
| Max. Die diameter |
(mm) |
510 |
| Die heat capacity |
(KW) |
12 |
| No. of heating zone |
(ZONE) |
5 |
| Blowing pressure |
(Mpa) |
0.8 |
| Air volume |
(M3/MIN) |
1.6 |
| Cooling water pressure |
(Mpa) |
0.3 |
| Water consumption |
(L/MIN) |
180 |
| Size of machine ( L*W*H) |
(m) |
5.8*2.9*4.4 |
| Weight of machine |
(TON) |
22 |
Extrusion blow molding machine installation, commissioning and training:
If the buyer needs seller to send technicians to workshop for supervising the erection and start-up, seller must support and send sufficient number of technicians and keep duration of stay in workshop. Usually it’s about 3~5 days in this duration. The first day is that when our technician is at the airport to factory of buyer. And from the first day, the buyer has to pay US$80 per day. And all accommodation, visa application & air ticket will be born by the buyer.
Extruson blow molding machine suppliers of main parts:
a) Hydraulic Parts
| Name |
Supplier |
| Oil Pump |
PARKER or SUNNY, America |
| Valve |
YUKEN or SUNNY |
| Hose, Joint |
PARKER SIR |
| Sealer |
Top DZ Europe |
b) Electrical Parts
| Name |
Supplier |
| Microcomputer Control System |
MITSUBISHI PLC, Japan |
| Touch Screen |
HITECH color screen, Taiwan |
| Temperature Controller |
MITSUBISHI, Japan |
| Conductor |
SCHNEIDER |
| Air Switch |
SCHNEIDER |
| Motor |
SIMENS BEIDE Asynchronous Motor |
| Power Resource |
MEAN WELL, Taiwan |
| Inverter |
MITSUBISHI |
c) Pneumatic Parts
| Name |
Supplier |
| Solenoid Valve |
FESTO, Germany |
| Cylinder |
FESTO, Germany |
আপনার বার্তাটি 20-3,000 টির মধ্যে হতে হবে!
